How to clean the bathroom thoroughly

If you get organized and follow our tips and tricks, you can have a sparkling clean bathroom in no time. guaranteed!

Clear The Ground

How to clean the bathroom fast in 20 minutes? Before getting down to work, clear the floor, remove all bulky objects that get in the way (such as stools, radiators, and bins), and take the opportunity to throw out the garbage or put the towels to wash.

Sweep And Dust

Once you have cleared the floor, it is time to sweep the floor and remove the dust from the surfaces. Better with a vacuum cleaner and chamois than with a broom and duster, since they displace dirt instead of trapping it.

Let The Cleaning Products Act

The next step when cleaning the bathroom thoroughly is to apply the cleaning products: the disinfectant in the toilet, the cleaner in the screen, the tiles, the bathtub, the sink, and the bidet (following this order). In this way, the product will act and the dirt will soften and it will be easier for you to remove it when you wipe it with a clean cloth.

Clean Bathroom Tiles And Screens

The same time you have dedicated to applying the products to the different surfaces (the most appropriate order to apply them is toilet, screen, tiles, bathtub, sink, and bidet) will have served to act and soften the dirt, and now you can put you to clean The first stop is the bathroom tiles and the screens of the bathtub or shower.

Clean The Bathtub

After the tiles and screens in the bathroom, it is the turn of the bathtub. You can take advantage of the shower spray to rinse off the cleaning product with which you had wet the entire surface.

Clean The Sink

After the bathtub, go to the sink. With a dry and clean cloth, she removes the product that you had left acting on the sink and taps. Then, also pass it through the rest of the piece that forms the sink or the surface in which it is embedded. And finally, clean the mirror with a piece of newspaper. Its texture drags dirt without scratching it and without leaving a shine.

Clean The Bidet

In the event that you have a bidet, do the same as with the sink. Remove with a clean cloth the product with which you had impregnated the interior and the taps and had left acting.

Clean The Toilet

It is very important that you have started by putting disinfectant in the toilet, but that it is the last place you clean. This way you get the disinfectant to act as long as possible. And since it is one of the main sources where germs accumulate, don’t run the risk of “infecting” other surfaces by inadvertently using the cloth you used to clean and dry the toilet to clean the sink, and the bathtub.

Mop The Floor

Once you have cleaned all the pieces and surfaces in the bathroom, it is time to scrub the floor.

Put Everything In Its Place

Finally, you only need to place the bulky objects that you had removed (heaters, bins, carts…) and put clean towels. And if you want to avoid cleaners and substances that are harmful to health or the environment, here’s how to make your own homemade cleaning products to clean the bathroom. A very frequent question that people ask today when it comes to cleaning the bathroom thoroughly is how to do it without using toxic substances. Here you have the answer.

How To Clean The Bathroom With Homemade Products

With the help of neutral soap, white vinegar, and baking soda, three of the star components of the most used household cleaning products, you can make your own cleaners and disinfectants.

Homemade disinfectant

Mix one part of white vinegar and another of neutral soap for every two of the water. With the resulting gel, you can disinfect bathroom surfaces without harming your health or the ecosystem.

Homemade limescale

Mix baking soda and white vinegar in equal parts (don’t be alarmed by the foam they can produce when mixed as it is not harmful). Use this mixture to rub the limescale stains or to let it act in the toilet and, after about 10 minutes, rub the stains on the bottom of the toilet with the help of the brush.

Homemade polish

To restore the shine to the tiles, moisten a cloth with a mixture of water and baking soda. Rub the tiles, then remove any remaining baking soda with a clean, dry cloth.